Electronic Equipment; Electronic Circuit Board; Backup Battery - EdilKamin PELLKAMIN 8 Installation, Usage Et Maintenance

• ELECTRONIC EQUIPMENT

LEONARDO is a combustion safety and control system which allows optimal performan-
ce in all conditions thanks to two sensors measuring the pressure level in the combustion
chamber and smoke temperature.
The detection of and subsequent optimisation of these two parameters is continuous in
order to correct operation anomalies in real time.
The LEONARDO system offers constant combustion, automatically regulating the draft
based on the characteristics of the chimney fl ue (bends, length, shape, diameter, etc.)
and environmental conditions (wind, humidity, atmospheric pressure, installations at high
altitude, etc.). The standards for installation must be respected.
The LEONARDO system is also able to recognise the type of pellets and automatically
adjust the fl ow moment by moment to ensure the required level of combustion.

• ELECTRONIC CIRCUIT BOARD

Emergency button
remote-control
device
Smoke-expulsion motor
ventilation ambient
AUX PORT
(connected via optional serial port cable code 640560)
This is a clean, potential free contact, useful for connecting a telephone combiner or
other control devices via an optional cable.

BACKUP BATTERY

A backup battery is found on the control board (3-Volt CR 2032 battery).
Its malfunction is indicated with the following messages: (not considered a defect but
due to normal wear-and-tear): "Battery check".
For more detailed information, please contact the DEALER who has performed the ! rst
1st ignition.
GENERAL INFORMATION
ambient-air
sensor
smoke rpm
Vacuum gauge
thermocouple
Lithium CR2032
backup battery
SCREW
ventilation ambient
Vacuum gauge
Reading points
230 vac power
Micro insert
closed supply
cable gland
50hz +/-10%
- 35
-
*
* patented