EdilKamin PELLKAMIN 8 Installation, Usage Et Maintenance page 43

INSTALLATION OF THE PELLET
LOADER KIT (Optional)
N.B.: THE PELLET LOADER KIT ALLOWS PELLETS
TO BE LOADED IN THE HOPPER FROM THE FRONT
WITHOUT HAVING TO TURN OFF THE INSERT.
The insert is already prepared for the installation of the pellet
loader on the mantel.
ATTENTION:
THE OPERATION MUST BE PERFORMED BEFORE
INSTALLING THE INSERT.
To fi t, proceed as follows:
• Install the bracket for centring the pellet loading tube (I – Fig.
8) on the base plate (A).
Fit the pellet loading tube (L - fi g. 9) on the collar of the
bracket collar (H - fi g. 8), securing it with the clamp supplied
(M - fi g. 8).
• Proceed with the installation of the insert (Fig. 10-11) as
described in the previous pages.
• For the installation of the loading mouth (L – Fig. 11), see the
pages that follow.
INSTALLATION
! g. 8
! g. 9
! g. 10
! g. 11
- 43
-
H
A
L
M
I
L
I