Mantel Iron - Dru SAXO SL 70 Instructions D'installation Et Mode D'emploi

Mantel Iron

Mantel Iron
An iron mantel is available by order from your installer.
A mantel serves to support the brickwork above the
fireplace, enabling the stress-free installation of the
appliance.
Shorten the iron mantel to the required length and lay it
on the brickwork. We advise you to use 70 till max. 100
mm thick bricks.
Position the iron mantel as illustrated in fig. 3.
Fix the threaded rod provided onto the corner of the
iron mantel with two nuts (1). Remove the hook with the
right-handed thread from the tightening screw (2) and
screw in the threaded rod. Fix the tightening screw (2)
with the hook (3) to the eye (4) to the other side. Fix
the eye to the wall with a rawlplug. Level it all using the
tightening screw.
The requires the use of a service flap.The service flap is
supplied as a standard accessory.
Threaded rod with tightening screw
(1)
70-100
SAXO SL
38c-1236
fig. 3
23
INSTRUCTIONS FOR INSTALLATION
(3)
(2)
(4)
Saxo SL