BFT EOS 120 Instructions D'utilisation Et D'installation page 23

ACCESS TO MENUS
Press the OK key
OK
Control unit software version
No. total manoeuvres
OK (in thousands)
No. manoeuvres since latest
maintenance(in thousands)
No. radio control devices
memorised
+ -
OK
+ -
- +
+ -
OK
+ -
- +
FOLLOWING MENUS
FIG. B
Fig. A
OK
[ ]
Preset value
Parameter increment/reduction
/ON
/OFF
or ON/OFF commutation
Press OK key (Enter/confirm)
OK
Menu scrolling
- +
(+ = preceding - = following)
LEGENDA
+ -
Simultaneously press the + and - keys.
Simultaneous pressure of the + and – keys
allows you to exit the active menu and return to
the preceding menu; if this takes place at the
main menu level, programming is exited and
the display switched off.
The modifications made are only confirmed if
the OK key is subsequently pressed.
OK! message (confirms modification made)
KO! message (value or function error)
"Wait" message (enter value or function)
EOS 120 VENERE D Ver.01 -
23