Table des Matières
Publicité
R
G
T
96
F
S
6.0-3
Maintenance
Oil top-up procedure in the lubricator:
•
Detach the compressed air line.
•
Remove the cup 'T' by rotating it.
•
Add oil as required.
•
Make sure that the gaskets are in position before
re-closing the cup.
USE ONLY OILS FOR AIR DEVICES, DO NOT USE
BRAKE FLUID OR OTHER NON-RECOMMENDED
LUBRICANTS.
Recommended oils for the filter/lubricator unit:
10W non-detergent / air tool oil.
If the machine is fitted with a tubeless inflator tank.
•
Drain the condensation from the tank.
The recommended repetition schedule for
Note:
the operations described are valid for normal
machine use.
We suggest you check and perform
extraordinary maintenance every time you
consider it necessary and in general, more
frequently than the time intervals indicated.
6.1 Storage
In case the machine is not to be used for a long period
of time (6 months or more) it is necessary to disconnect
all power sources, discharge the bead seater tank (for
models fitted with the Tubeless System GT), protect
all parts that may be damaged, protect the air hoses
that may be damaged by the drying process.
When putting the machine back in operation, check
first the condition of all previously protected parts, and
check for correct functioning of all devices before using
the machine again.
Operator's Manual
QUADRIGA 1000/BB
Publicité
Table des Matières
