Speaker Connection; Speaker System - Sharp MD-E9000H Mode D'emploi

Controls and Indicators (continued)

Speaker System

01.
Tweeter
02.
Woofer
03.
Bass Reflex Duct
04.
Speaker Terminals
Make sure nothing comes into contact with the speaker diaphragms when you re-
move the speaker grilles.
E-7
*07-E02-07-MD9000H(SEEG) 7
1
2
4
3
Placing the speaker system:
There is no distinction between the right and the left speakers.
Left speaker

Speaker connection

Connect the black wire to the minus (-) terminal and the red wire to the plus (+)
terminal.
Red
Red
Black
Black
Caution:
Connect the speaker wires to the speakers first, then to the unit.
Use speakers with an impedance of 4 ohms or more, as lower impedance speak-
ers can damage the unit.
Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
Do not let the bare speaker wires touch each other.
Incorrect
01.4.19, 3:07 PM
Right speaker
Incorrect