Sharp MD-E9000H Mode D'emploi page 131

Recording to a MiniDisc from a CD (continued)
Recording the first several tracks of a CD
Create your own hit collection. For example, you can record the first several tracks of
a CD.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a CD and a recordable MiniDisc.
4
Press the TRACK EDIT button.
5
Press the TRACK EDIT button repeatedly to select the last track
number you want to record.
Total recording tracks
If you select 21 tracks or more, "EDIT OVER" will be displayed.
6
Press the HIGH or NORMAL button.
The CD will be recorded in order, starting from the first track. When a Mini-
Disk runs out of recording space or when a CD has been completely re-
corded, the CD and the MiniDisc will stop automatically.
Note:
When repeat play has been set and you press the HIGH or NORMAL button, the
repeat mode will be cancelled automatically and track editing will start.
To stop recording:
Press the MD button.
Playback and recording will stop and the track numbers will be written on the
MiniDisc.
*07-E29-33-MD9000H(SEEG) 32
Total recording time
Programmed recording from a CD
1
Programme desired tracks from a CD (see page 17).
2
Load a recordable MiniDisc.
3
Press the HIGH or NORMAL button.
Programmed playback will start, and recording will start automatically.
Programmed tracks will be recorded in order. After the unit has finished
recording the last track, recording will stop automatically.
Note:
When repeat play has been set and you press the HIGH or NORMAL button, the
repeat mode will be cancelled automatically and programmed recording will start.
To stop recording:
Press the MD button.
Playback and recording will stop and the track numbers will be written on the
MiniDisc.
01.4.19, 3:09 PM
MD-E9000H
D
F
S
V
I
N
E
E-32