Titling A Minidisc - Sharp MD-E9000H Mode D'emploi

Titling a MiniDisc

Creating disc and track names
You can give a name to discs and tracks.
One disc name and up to 255 track names can be created per disc (a maximum of
40 characters for the disc and each track name and a total of 1,700 characters can
be entered).
Playback-only MiniDiscs cannot be edited.
*07-E34-38-MD9000H(SEEG) 34
1
Press the MD button and load a MiniDisc (see page 15).
2
Disc name
Whilst in the stop mode of
MiniDisc, press the NAME/TOC
button, and select "DISC
NAME" using the 5/3 5/3 or
5/3 5/3 5/3
2/4 button.
2/4 2/4 2/4 2/4
3
Within 10 seconds, press the MEMORY/ENTER button.
Cursor
The unit will enter the character input mode.
To cancel the operation, press the MD
4
Press the 1 - 10, SYMBOL/TIME and >10 buttons to enter charac-
ters.
The >10 button allows switching between capital and small letters.
You can enter symbols by pressing the SYMBOL/TIME button (see page
35).
5
When the name has been entered, press the MEMORY/ENTER
button.
01.4.19, 3:09 PM
MD-E9000H
Track name
During playback or in the
pause mode of MiniDisc, press
the NAME/TOC button, and se-
lect "TRACK NAME" using the
5/3 or 2/4 2/4 button.
5/3 5/3 5/3 5/3 2/4 2/4 2/4
button.
E-34
D
F
S
V
I
N
E