Listening To A Memorised Station; Memorising A Station; To Recall A Memorised Station - Sharp MD-E9000H Mode D'emploi

Listening to a Memorised Station

Memorising a station

You can store 40 AM and FM stations in memory and recall them at the push of a
button. (Preset tuning)
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 20.
2
Press the MEMORY/ENTER button to enter the preset tuning sav-
ing mode.
3
Within 5 seconds, press the PRESET ( X X X X X or W W W W W ) button to select
the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 5 seconds, press the MEMORY/ENTER button to store
that station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset
station.
When a new station is stored in memory, the station previously memorised
will be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
E-21
*07-E20-21-MD9000H(SEEG) 21

To recall a memorised station

When in the tuner mode, press the PRESET (X X X X X or W W W W W ) button to se-
lect the desired station.
To clear all memorised stations
1 Press the CLEAR/DELETE button on the remote control for 3 seconds or more.
2 Within 10 seconds, press the MEMORY/ENTER button.
01.4.19, 3:08 PM