Error Messages - Sharp MD-E9000H Mode D'emploi

Error Messages

When an error message is displayed, proceed as follows:
Error messages
BLANK MD Nothing is recorded.
(Neither music nor disc name
is recorded.)
Can't COPY You tried to record from a
copy prohibited CD.
Can't EDIT A track cannot be edited.
The disc is damaged.
Can't READ
TOC information cannot be
(
:Number or
read.
symbol)
MiniDisc not specified.
Recording cannot be per-
Can't REC
formed correctly due to vibra-
tion or shock in the unit.
The TOC information could
Can't WRITE
not be created properly due
to a mechanical shock or to
scratches on the disc.
DISC FULL The disc is out of recording
space.
Er-CD 20 The CD cover is not working
properly.
A MiniDisc is not working
Er-MD
properly.
( :Number or
symbol)
EDIT OVER You chose 21 or more tracks
for track editing.
The remaining time available
for recording is short.
MD NO DISC A MiniDisc has not been
CD NO DISC loaded.
The MiniDisc data cannot be
read.
A CD has not been loaded.
The CD data cannot be read.
E-43
*07-E42-46-MD9000H(SEEG) 43
Meaning Remedy
Replace it with another disc.
Replace the CD.
Change the stop position of the
track and then try editing it.
Replace it with another disc.
Erase the disc and try record-
ing again.
Re-record or replace the
MiniDisc.
Set this unit to the stand-by
mode and try to write the
TOC again. (Remove any
source of shock or vibration
whilst writing.)
Replace the disc with another
recordable disc.
Set this unit to the stand-by
mode and turn the power on
again.
Set this unit to the stand-by
mode and turn the power on
again.
Decrease the number of
tracks.
Replace it with a disc that has
enough time to record.
Load a MiniDisc.
Reload the MiniDisc.
Load a CD.
Reload the CD.
Error messages Meaning
NAME FULL The number of characters for
the disc name or track name
exceeds 40.
NOT AUDIO The data recorded on this
disc is not audio data.
PLAYBACK MD You tried to record on a play-
back-only disc.
PROTECTED The disc is write protected.
TEMP OVER The temperature is too high.
TOC information recorded on
TOC FORM
the MD does not match the
( :Number or
MiniDisc specifications or it
symbol)
cannot be read.
There is no space left for re-
TOC FULL
cording track numbers.
There is no space left for re-
TOC FULL1
cording character informa-
tion.
The data contains an error.
? MD DISC
MiniDisc not specified.
MiniDisc is not working prop-
POWER?
erly.
Tuner is not working properly.
ER-TU
(
:Number or
symbol)
01.4.19, 3:09 PM
Remedy
Shorten the disc or track
name.
Select another track.
Replace the disc.
Replace it with another re-
cordable disc.
Move the write protection tab
back to its original position.
Set this unit to the stand-by
mode and wait for a whilst.
Replace it with another disc.
Erase the disc and try record-
ing again.
Replace it with another re-
cordable disc.
Replace it with another re-
cordable disc.
Erase the needless charac-
ters.
Replace it with another disc.
Set this unit to the stand-by
mode and turn the power on
again.
Set the unit to the stand-by
mode and turn the power on
again.