Speaker Connection - Sharp CD-BK137W Mode D'emploi

„ Speaker connection

Front speakers
Connect the black wire to the FRONT (-) terminal, and the red wire to the FRONT (+)
terminal.
Surround speakers
Connect the black wire to the SURROUND (-) terminal, and the white wire to the
SURROUND (+) terminal.
Surround speaker (Right)
Front speaker (Right)
Red
Black
White
Caution:
z If you use other speakers with impedance lower than that
specified, the unit may be damaged. Front speakers: 8
ohms Surround speakers: 16 ohms
z Do not mistake the right and the left channels. The right
speaker is the one on the right side when you face the unit.
z Do not let the bare speaker wires touch each other.
z Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
z Do not stand or sit on the speakers. You may be injured.
„ Placing the speaker system
To enjoy the surround effect, we recommend that you place each speaker as shown
to the below.
Front speaker
(Left)
Surround speaker (Left)
Surround speaker
(Left)
Installation of the surround speakers:
If possible, mount the surround speakers on the wall. Install them 60 cm - 90 cm (23"
- 35") above the height of your ears when you are seated.
Example: when installed on the wall
Front speaker (Left)
Incorrect
Main unit
TV
Front speaker
(Right)
Surround speaker
(Right)
Example: when installed vertically
Wall
60 - 90 cm
(23" - 35")
ENGLISH
01/8/28 CD-BK137W(X)E1.fm
CD-BK137W
E-8