How To Use - Arktic 232903 Mode D'emploi

6.5. CONNECTION TO POWER SUPPLY
The connection to the power source must be made
by trained and qualified service technicians. The
power cable is supplied with the cooling/freezing
Prior to making the connection, make sure:
• The supply voltage corresponds to the appliance
voltage of 230 V / 50 Hz / 1 ph. Proper operation of
the appliance requires that the voltage should be
within ± 6% of the rated voltage.
• The electrical system used to power the appliance
must be suitable for rated parameters of the ap-
Connection stages:
• Install the thermomagnetic circuit breaker suita-
ble for rated output power of the appliance to be
installed.

7. HOW TO USE

7.1. PLACING TRAYS AND CONTAINERS IN THE REFRIGERANT'S/FREEZER'S CHAMBER
Never stack food items on top of each other. Divide them evenly on the tray or GN container.
EN
Keep vertical space between trays and/or GN containers
In order to ensure optimum circulation of hot air in the refrigerant's/freezer's chamber, a minimum verti-
cal distance of 40 mm between the trays or GN containers is required.
8
counter. A thermomagnetic circuit breaker (field
supply) must be installed between the socket and
the power cable of the appliance.
pliance to be installed.
• The electronic system connected to the counter
complies with applicable requirements. Electrical
connections and installation of the thermomag-
netic circuit-breaker have been performed by a
qualified person.
• Connect the counter to the output on the thermo-
magnetic circuit breaker.
• Make sure the counter is operational (signalled by
an indicator lamp).