Location And Function Of Parts; Front Panel - Sony DSR-45 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Location and Function of Parts

Location and Function of Parts

Front Panel

1 Cassette compartment
2 REMOTE/LOCAL switch
3 ON/STANDBY
switch and
lamp
4 TIMER selector
5 AUDIO MONITOR
selector
6 PHONE LEVEL
control knob
7 PHONES jack
8 RESET button
1 Monitor display section
(see page 14 (GB))
9 CHARACTER DISPLAY
(MONITOR OUT) switch
1 Cassette compartment
Insert a standard-size or mini-size DVCAM cassette.
To open or close the compartment, press the EJECT
button qa.
For details of cassettes that can be used, see "Notes on
Video Cassettes" on page 30 (GB).
2 REMOTE/LOCAL switch
Set this switch to REMOTE when controlling the unit
from an external device connected to the RS-422A/RS-
232C connector on the rear panel.
REMOTE: Enables an external device connected to
the RS-422A/RS-232C connector.
When setting this switch to REMOTE, you can
restrict the tape transport and menu control
buttons on the front panel, the Remote
Commander, and the optional Remote Control
Unit connected to the CONTROL S IN jack using
LOCAL ENBL on the REMOTE menu.
For details on the REMOTE menu, see "REMOTE
menu" on page 80 (GB).
LOCAL: Disables an external device connected to
the RS-422A/RS-232C connector.
12
(GB)
Chapter 1 Overview
1
CH-
CH-
1/2
3/4
MIN
MAX
CH-1
CH-2
CH-3
CH-4
The switch setting enables/disables external devices as
follows.
REMOTE
RS-422A
a)
Enabled
RS-232C
a)
Enabled
a)
LANC
Enabled
b)
CONTROL S IN
Depending on the
setting of LOCAL
ENBL on the
REMOTE menu
Remote Commander
b)
Depending on the
setting of LOCAL
ENBL on the
REMOTE menu
DV (i.LINK)
Enabled
a) You also need to set the remote selector on the rear panel
according to the connector to which you connect a
device.
b) Depending on the setting of COMMANDER on the
OTHERS menu.
Notes
• An external device connected to the LANC jack can
operate the unit regardless the setting of this switch as
long as the remote selector is set to LANC.
4 Display window
(see page 19 (GB))
qa EJECT button
3 Audio control section
(see page 18 (GB))
2 Tape transport control
section
(see page 16 (GB))
0 INPUT SELECT
selector
LOCAL
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dsr-45p

Table des Matières