Making Printouts For Identification Photographs - Sony UP-2300P Mode D'emploi

Making Printouts for Identification Photographs

Making printouts for identification photographs of a desired size
2
Select the memory page by pressing the MEMORY PAGE button.
3
Capture the image in memory.
When STICK DIF 4 or STICK DIF 16 is selected: Press the CAPTURE
button at the instant the image you want to print appears on the screen.
Repeatedly capture the remaining images by pressing the CAPTURE
button.
When STICK DUP 4 or STICK DUP 16 is selected: Press the CAPTURE
button at the instant the image you want to print appears on the screen. The
full-size memory image is displayed on the video monitor screen. Four or
16 reduced images will be printed on one sheet of paper.
4
Press the PRINT button.
The multiple reduced images are printed on one sheet of sticker paper.
The unit supports the application modes such as FLEX IPP and FIX IPP that allow
you to make a printout for identification photographs.
• FLEX IPP application mode allows you to make a printout with identical images
of the desired size. The number of identical images is automatically calculated
according to the size that you have set.
• FIXED IPP application mode allows you to make a printout with a full-size
image, or identical multiple reduced images.
a) The number of reduced images depends on your TV system. (see page 49)
About printing pack and paper tray
To make printouts for identification photographs in FILL IPP or FIXED IPP mode,
it is recommended to use the UPC-2040A Self-Laminating Color Printing Pack
(not supplied) specially designed for this mode. The printout of this type paper is
well preserved.
Also, the paper size of this type is a little larger than that of others. Thus, the
supplied paper tray is too small to load paper.
The UPA-2002 (not supplied: for UP-2300P/2800P/2850P/2900MD/2950MD,
supplied: UP-2330P only) is required.
For detailed information, contact your Sony dealer.
The FLEX IPP application mode allows you to select the size of one image. The
number of images in a single printout depends on the set size.
This section explains how to set the size and register it to the LOAD SIZE number.
a)
Continue to next page m
43
Operation