About This Manual - Sony UP-2300P Mode D'emploi

Introduction

About This Manual

Organization of this manual
This manual covers the following UP-2000 series color video printers.
• UP-2300P
• UP-2330P
• UP-2800P
• UP-2850P
• UP-2900MD
• UP-2950MD
Wherever the operation or any other item differs between the models, this manual
clearly describes those differences.
The difference among models is as follows.
No. of memories
UP-2300P 1
UP-2330P 1
UP-2800P 1
UP-2850P 4
UP-2900MD 1
UP-2950MD 4
In this manual, the UP-2950MD is used for illustrations.
Also, the monitor display and printer window display are used to explain the
operation. If your printer is a UP-2300P/2330P which is not equipped with the
printer window display, perform operations according to the monitor display
explanation.
This manual is divided into four chapters. This section explains the organization of
this manual.
Introduction
Describes the features and system configuration of the color video printer.
Operation
Describes actual printing once all connections and adjustments have been made, as
explained in the next chapter. You will be able to make various types of printouts
after reading through this chapter.
Installation and adjustment
Describes how to make connections and make adjustments using the menus
displayed on the video monitor and printer window display. Once all connections
and adjustments have been made, there should be no need to perform these
operations again during normal printing operations. These operations must,
however, be performed after reinstalling, or if the picture quality degrades, or if
adjustment becomes necessary because the peripheral equipment is changed. Also
covered is the use of the printer's remote control unit (not supplied).
RGB SYNC Printer window display
connector (LCD)
None None
None None
Yes Yes
Yes Yes
Yes Yes
Yes Yes
NTSC/PAL selector
(TV system)
None (PAL)
None (PAL)
None (PAL)
None (PAL)
Yes (NTSC/PAL)
Yes (NTSC/PAL)
5
Introduction