Location And Function Of Parts And Controls; Front - Sony UP-2300P Mode D'emploi

Location and Function of Parts and
Controls
For details, refer to the pages given in parentheses.

Front

1 U POWER switch (14)
Press to turn the printer on or off.
2 Top cover (on the top panel)
Usually, do not open this top cover. Only in
case the paper has jammed inside the top
cover, open the top cover to remove a jammed
paper.
If you open the top cover, there is the other
black cover.
3 Printer window display (only for
UP-2800P/2850P/2900MD/2950MD)
Displays the messages that also appear along
bottom edge of the monitor screen. Also
displays the menu screen line to which the
cursor is positioned. If an error occurs, a
corresponding error message is displayed.
The printer window display can be cleared
with the SYSTEM SETUP menu.
4 Remote sensor (64)
Aim the head of the remote control unit
toward this sensor.
108
Others
5 PRINT lamp
Lights while the printer is printing.
6 ALARM lamp (103)
Lights in orange when the ink ribbon or paper
is exhausted, the paper jams, or another
problem occurs.
7
MULTI PICTURE button (35, 41,
48)
Press this button to select the desired printout
type. When you press this button, the currently
selected printout type lights green for two or
three seconds. Each time you press this button,
the type lights green in the order.
In FLEX IPP mode, this button is used to
select the LOAD SIZE number to load the
preset size of the image. When you press this
button, the currently selected LOAD SIZE
number lights green for two or three seconds.
Each time you press this button, the LOAD
SIZE number lights green in the order.