Location And Function Of Parts; Front; Continue To Next - Sony UP-895 Mode D'emploi

Location and Function of
Parts
For details, refer to the pages indicated in parentheses.

Front

1 23456 7 8 9 q; qa qs
STD SIDE POSI NEGA
NOR
CONTR BRIGHT
SML R/T 2×
L/B
BOTH
Back
1 2 3
DIP SW
REMOTE
UP
DOWN
FEED COPY PRINT
EMPTY
OPEN
4 5 6
t IN T OUT
VIDEO
AC IN
UP-895MD/895CE
Front
1 Power switch and lamp
Turns the power on. The power lamp is lit while the
power is on.
2 Image size selector (29)
Selects the size of the image to be printed.
3 STD (standard)/SIDE selector (28, 29)
Selects the printing direction.
4 CONTR (contrast) control (30)
Adjusts the contrast of the printouts.
5 BRIGHT (brightness) control (30)
Adjusts the brightness of the printouts.
6 POSI(positive)/NEGA (negative) selector (29)
Set this to the NEGA position to make negative
printouts.
7 FEED button (26, 27, 28, 32)
Press to feed paper. The paper feeds as long as the
FEED button is held down.
Pressing this button during printing results in an
interruption of the printing.
8 COPY button (28)
Prints another copy of the previous printout.
9
PRINT button (27)
Prints the image currently displayed on the video
monitor. The image displayed when you press the
PRINT button is stored in memory.
0 EMPTY lamp (27)
Lights when the printer is out of paper.
Continue to next page c

Location and Function of Parts

Others
35