Loading Paper - Sony UP-2300P Mode D'emploi

Before Printing (continued)

Loading Paper

12
Operation
To load paper, follow the procedure below. Be careful not to touch the printing
surface.
Notes
• When loading the paper while the printer is operating, do not turn off the power.
Turning off the power will cause the image stored in memory to be lost.
• Do not touch the ink ribbon when handling the paper.
1
Open the front panel by pulling the front panel top towards you.
2
Push the part marked with PUSH on the paper tray.
The paper tray pops out.
3
Place the paper in the paper tray.
Notes
• The amount of paper that the paper tray holds depends on the paper in use. When
adding paper to a partly full tray, be careful that the total number of sheets does
not exceed the limit. If you exceed this limit, paper jams may occur.
The limit is the amount of paper contained in one printing pack.
For detailed information on the maximum amount of paper that the paper tray
can hold, see "Ink Ribbon Cartridge and Paper" page 99.
• Do not place different types of paper in the tray. Doing so may cause paper jams
to occur.
• Load the paper so that it lays flat in the paper tray. If the paper is curled, it will
overflow from the paper tray and the printing position may shift. If this happens,
load fewer sheets in the paper tray.