Loading Paper; Continue To Next - Sony UP-2100P Mode D'emploi

Loading Paper

To load paper, follow the procedure below. Be careful not to touch the printing
surface.
Notes
• Use only ink ribbon cartridge and paper "UP-2010 Color Printing Pack", that are
• When loading the paper while the printer is operating, do not turn off the power.
• Do not touch the ink ribbon when handling the paper.
1
2
3
designed for use with this printer. Failing to do so is likely to result in
unsatisfactory printing or malfunctions.
Turning off the power will cause the image stored in memory to be lost.
Open the front panel by pulling the front panel top towards you.
Push the part marked with PUSH on the paper tray.
The paper tray pops out.
Place the paper in the paper tray.
Notes
• When adding paper to a partly full tray, be careful that the total number of
sheets does not exceed the limit. If you exceed this limit, paper jams may
occur.
The limit is the amount of paper contained in one printing pack.
For detailed information on the maximum amount of paper that the paper tray
can hold, see "Ink Ribbon Cartridge and Paper" page 50.
• Load the paper so that it lays flat in the paper tray. If the paper is curled, it
will overflow from the paper tray and the printing position may shift. If this
happens, load fewer sheets in the paper tray.
Continue to next page m
Operation
11