Making A Label For A Floppy Disk - Sony DMP-1000 Mode D'emploi

Making a label for a floppy disk

When printing the input
image from the video
equipment
You cannot make a label
for a floppy disk.
Printing the date
You can print the date
when the image was
saved by setting DATE to
"ON."
32 GB
Making Various Prints
You can make a label for a floppy disk by using the
sticker-type print paper.
The selected image is printed as large picture on one
label, and 3 thumbnail images with lines are printed on
the other label. The total number of images is printed
at the bottom left of the label.
Before you begin
1 Turn on the printer and television and set the input
selector of the television to "VIDEO."
2 Set INPUT SELECT to "FD."
1
Select " (FD label print)" using the print mode
dial.
FD label print
2
Select the image for printing.
1 Insert the floppy disk into the floppy disk slot.
2 Press the arrow buttons to move the white
frame to the image you want to print, then
press ENTER.
The selected image is placed on the upper half
of the print and the leftmost of the thumbnail
on the lower half.