Ryobi RBC18X20B4 Traduction Des Instructions Originales page 8

RESIDUAL RISKS
Even when the product is used as prescribed,
it is still impossible to completely eliminate
certain residual risk factors. The following
hazards may arise in use and the operator
should pay special attention to avoid the
following:
– Injury caused by vibration. Hold the
product by designated handles and
restrict working time and exposure.
– Injury caused by exposure to noise.
Wear hearing protection and limit
exposure.
– Injury caused by flying debris. Wear eye
protection at all times.
Contact with cutting means. Ensure that the
blade protectors are fi tted when the machine
is not in use. Keep hands and feet away from
the blades at all times.
Kickback can occur
brushcutter. Ensure proper control by using
both hands on the designated handles. Read
and follow the directions elsewhere in this
manual to help reduce the risk of kickback.
Risk of falling objects. During brush cutting,
wear head protection if there is any risk of
falling objects.
RISK REDUCTION
It has been reported that vibrations from
handheld products may contribute to a
condition called Raynaud's Syndrome in
certain individuals. Symptoms may include
tingling, numbness, and blanching of the
fi ngers, usually apparent upon exposure to
cold. Hereditary factors, exposure to cold
and dampness, diet, smoking, and work
practices are all thought to contribute to the
development of these symptoms. There are
measures that can be taken by the operator to
possibly reduce the effects of vibration:
■
Keep your body warm in cold weather.
When operating the product, wear gloves
to keep the hands and wrists warm. It is
reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to
increase blood circulation.
■
Take frequent work breaks. Limit the
amount of exposure per day.
If you experience any of the symptoms of this
| English
6
when using the
condition, immediately discontinue use and
see your doctor about these symptoms.
WARNING
Injuries may be caused or aggravated by
prolonged use of a tool. When using any
tool for prolonged periods, ensure you take
regular breaks.
KNOW YOUR PRODUCT
See page 206.
1. Upper shaft
2. Bike handle
3. Lock-out trigger
4. Trigger
5. Lower shaft
6. TRI-ARC blade
7. Blade guard
8. Blade protector
9. Harness
10. Battery
11. Battery latch button
12. Charger
13. Grass deflector
14. Cut-off blade
15. Cutting line
16. Spool retainer
17. Spool
18. Eyelet
SYMBOLS ON THE PRODUCT
Safety alert
Pull: Quick release tab
Read and understand all
instructions before operating
the product, follow all warnings
and safety instructons.
Wear eye, ear, and head
protection.
Wear non-slip heavy-duty
gloves.
Do not expose to rain or damp
condition.
Wear non-slip safety footwear
when using the product.