Starting / Stopping The Engine - Stihl FS 510 C-M Notice D'emploi

Putting down the machine in an
emergency
As soon as it becomes apparent that a
dangerous situation is developing, the
machine must be put down quickly.
Practice setting down the machine
quickly. In order to avoid damage, when
practicing, do not throw the machine on
the ground.
FS 510 C-M, FS 560 C-M
Starting / Stopping the
Engine
Controls
3
2
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and Stop
positions. Press the momentary
contact stop switch to switch off the
ignition.
Function of stop switch and ignition
system
The stop switch is normally in the Run
position: Ignition is on in this position –
the engine is ready to start and may be
started. The ignition is switched off when
the stop switch is depressed. It is
automatically switched on again after
the engine comes to a standstill.
Symbols on choke knob
Start } – the engine is started in this
position.
Normal run position F – engine runs or
can fire.
Starting the Engine
1
Press the fuel pump bulb (4) at least
N
five times – even if the bulb is filled
with fuel.
English
4
29