Fueling; Starting / Stopping The Engine - Stihl HS 45 Notice D'emploi

English

Fueling

Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-up
in the tank to release slowly.
After fueling, tighten fuel cap as
securely as possible by hand.
Have the fuel pickup body in the tank
changed once every year.
12
All manuals and user guides at all-guides.com
Starting / Stopping
the Engine
Observe safety precautions
Start as follows:
: Move the blade lock lever (1)
forwards against stop - in direction
of front handle.
2
5
4
: Stop switch (2) to I
: Press down the throttle trigger
interlock lever (3), squeeze the
throttle trigger (4) and hold in that
position.
: Press in the starting throttle lock (5).
: Release the throttle trigger, interlock
lever and starting throttle lock, this is
the starting throttle position.
1
: Set the choke lever (6):
For cold start to g
For warm start to e
: Press fuel pump bulb (7) at least
five times.
3
: Place the machine on the ground.
: Remove the blade scabbard.
Make sure that cutting blades are
not touching the ground or any other
obstacles.
: Make sure you have a firm footing:
Hold the machine firmly on the
ground with your left hand on the
front handle and press down.
7
6
HS 45