Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
Sharpening aids for metal cutting
attachments
Flat sharpening files for items 4, 6 to
–
9
File holder with round file, for item
–
10
Saw set, for item 10
–
STIHL balancer for items 4 to 11
–
Sharpening templates (metal or
–
cardboard) for items 6 and 7
Mounting hardware for metal cutting
attachments
60 and 70 mm dia. thrust washers
–
60 and 65 mm dia. thrust plates
–
Rider plate for mowing and sawing
–
applications
Grass shield for mowing
–
attachments
Guard ring for brush knives and
–
shredder blades (for use in place of
rider plate)
Nut
–
Other Special Accessories
Safety glasses
–
Combination wrench
–
Stop pin
–
Full harness
–
Shredder blade mounting kit
–
Shredder blade retrofit kit
–
Limit stop kit
–
Cover plate kit for winter operation
–
52
STIHL filler nozzle for fuels
–
STIHL gear lubricant
–
Contact your STIHL dealer for more
information on these and other special
accessories.
Maintenance and Repairs
Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
FS 510 C-M, FS 560 C-M
Publicité
Chapitres
Table des Matières
