Ribimex PRBAT20 Manuel D'instructions Et D'utilisation page 34

The harness has a quick release mechanism. Press both sides of the release button with one hand, the
machine can be quickly released from the operator in an emergency (eg, spark, smoke, or abnormal
vibration) (Fig.7).
4.3- Batteries and charger
NOTE: batteries and the charger are not included.
LEDs on battery
The LEDs on the battery (b) indicate the charging level of the battery.
Press on button [a], the LEDs battery level will light up:
3 LEDs on = the battery is fully charged (full capacity).
2 LEDs on = the battery is half charged (medium capacity).
1 LED on = the battery capacity is low and needs to be charged.
0 LED on = the battery is depleted.
To insert and remove batteries
a) To insert: insert batteries into the handle housing (Fig. 8). Make sure it is properly locked.
b) To remove: press the release button and then pull batteries out of the handle.
Fig. 6A
Fig. 7
Fig. 8
Fig. 6B
Page 34 / 62