Ribimex PRBAT20 Manuel D'instructions Et D'utilisation page 23

Symbols.
Warning! Read the instruction manual before operating this machine or prior to carrying
any intervention (e.g. cleaning, maintenance, repair ...) on the tool.
Follow all warnings and safety precautions to avoid a danger.
Caution! Risk of injury and/or damage and/or deterioration of product in case of non-
compliance to safety requirements.
Do not expose to weather conditions (ex.: rain, snow ...) or to moisture. Do not use
outdoors during weather conditions (e.g. rain, snow...). Do not leave outdoors while it is
raining
Do not expose product to extreme temperatures (too hot or too cold environment).
Protect from over exposure to direct sunlight.
Wear protective equipment!
Wear eye protection.
Wear ear protection.
The machine may exceed 85 dB(A) at the workplace; in this case, noise protection
measures need to be taken to protect the user.
Wear dust mask.
Wear protective gloves and boots.
Wear appropriate clothing
Keep all body parts (esp hands and feet) away from the cutting device (nylon line).
Injury hazard: moving parts. Never touch or grab the nylon line when product is at rest or
during operation. It is recommended to wear protective gloves for intervention on tool.
The rotation speed of the cutting element must be greater than the no load speed of the
tool.
-1
xxxxxmin
Warning! Kickback.
An uncontrolled kickback of the blade may occur when using the brush cutter, especially
when the spinning blade meets or hits a hard or solid object in the critical zone (i.e. the
angle of the blade between 12 and 2 o'clock).
Risk of serious or fatal injury.
Do not touch. After intensive use some parts can get hot such as the motor housing.
Keep persons (esp. children) and animals away from product and working area. Other
persons and animals should remain at a safe distance of 3 meters or more when the
machine is being used. The operator is solely responsible for third persons in the working
area. Stop tool as soon as someone enters the working area.
Keep persons (esp. children) and animals away from product and working area. Other
persons and animals should remain at a safe distance of 15 meters or more when the
machine is being used
Caution! Danger of injury from flying parts!
Warning! Projection hazard (e.g. stones or other objects...)
Keep persons (esp. children) and animals away from product and working area
Noise level. Wear ear protection.
Tool complies with European directives
Warning: Electrical hazard. Presence of electric current.
Unplug charger immediately from its power supply if its power cord or the extension cord
are damaged. Unplug charger by pulling the plug. Do not pull the cable.
Disconnect charger from its power supply and remove the battery before proceeding to
Page 23 / 62