Hf02 Service Parts And Accessories - Aventics HF03 Mode D'emploi

72 AVENTICS | HF03/HF02 | 1987765472–BDL–001–AB
Characteristics, service parts and accessories
Directional-control valves
1)
2)
3)
Dummy plate
3)
Supply plate
4)
Subplate expansion consisting of:
1 x subplate, 3 x tie rod expansion, 1 x set of seals
Separator
Mating plug, straight, up to 8 valve positions
Mating plug, straight, up to 16 valve positions
Mating plug, angled, up to 8 valve positions
Mating plug, angled, up to 16 valve positions
Mounting kit for DIN rail, DIN EN 60715 35x15 for HF02
Mounting kit for DIN rail, DIN EN 60715, 35x15 for HF02
with bus coupler (central) or for HF03/HF02 combination
3) Delivery incl. 2 attachmentbolts and 1 seal
4) Maximum of 16 subplates per valve block
5) For wire cross-sections from 0.14 mm
7.5

HF02 service parts and accessories

5/2 change-over valve with
spring return
5/2 impulse valve
5/2 change-over valve with
pneumatic spring return
5/3 center position closed
2x3/2
1)
normally closed
2x3/2
2)
normally open
2x3/2
normally closed/
normally open
can be done using
can be done using
5)
5)
5)
5)
2
to 0.56 mm
Manual override
turn and detent
Code Order number Code Order number
AR 0820056051
BR 0820056501
CR 0820056001
DR 0820056601
GR 0820056101
HR 0820056201
IR 0820056301
Order Code
X
Y
2
Manual override
turn
AN 0820056052
BN 0820056502
CN 0820056002
DN 0820056602
GN 0820056102
HN 0820056201
IN 0820056302
Order number
1825700087
1821039036
1827010631
1827020289
1824484060
1824484059
1824484023
1824484024
1827000046
1827000030