Technical Data; Dimensions; Introduction And Description Of Equipment; Assembly Drawings - Tractel Tirfor Manuel D'installation, D'emploi Et D'entretien

MODEL
GB
Working load limit (t)
Weight:
• Machine (kg)
• Telescopic operating handle (kg)
• Standard 20 m of wire rope with fittings (kg)
Total weight of standard equipment (kg)

Dimensions:

• Length (mm)
• Length with optional hook (mm)
• Height (mm)
• Width (mm)
• Telescopic handle: retracted/extended (mm)
Original tirfor wire rope
®
• Diameter (mm)
• Guaranteed tensile strength* (daN)
• Weight per metre (kg)
Wire rope travel (forward /reverse)** (mm)
Recommended Tractel
* Including wire rope end fittings.
** Travel of the wire rope resulting from one complete cycle of operation of the operating handle at the working load limit.
1. INTRODUCTION AND DESCRIPTION
OF EQUIPMENT
The tirfor machine is a hand-operated lifting and pulling
®
machine. It is versatile, portable and multi-purpose,
not only for pulling and lifting but also for lowering,
tensioning and guying.
The originality of the tirfor
operation directly on the wire rope which passes through
the mechanism rather than being reeled onto a drum
of a hoist or conventional winch. The pull is applied by
means of two pairs of self-actuating jaws which exert a
grip on the wire rope in proportion to the load being lifted
or pulled. A telescopic operating lever fitted to either the
forward or the reverse lever transmits the effort to the
jaw mechanism to give forward or reverse movement
of the wire rope.
The machine is fitted with a hook or anchor pin,
depending on the model, so that it can be secured
quickly to any suitable anchor point.
tirfor machines, intended for lifting and pulling materials,
®
are available in two ranges each with three models of
different capacities:
– T500D range for light duty applications (with safety
release catch).
– TU range for heavy duty applications (with safety
release catch).
All the tirfor machines in the TU™ and T500D ranges
®
comply with the Machinery Directive 2006/42/EC and
meet the essential requirements of standard EN 13157.
The TU™ range complies in full with the requirements
4

TECHNICAL DATA

TU
15.5
527
265
108
395/620
70/76
pulley model
®
machine is the principle of
®
8 T508 D TU
™ ™ ™
0.8
8.4 6.6 18
1 1 2.4
6.1 6.1 13.1
13.7 33.5
420 660
- 550 -
250 330
99 140
400/690 680/1190
8.3
4000
0.25
46/63 56/70
E460H
of standard EN 13157. Under normal conditions of use,
the machine may be used at any ambient temperature
from -10°C to +50°C. In exceptional circumstances,
this machine may be used at ambient temperatures of
between -20°C and +70°C.
Each machine is supplied with a telescopic operating
handle, and usually with a 20 m standard length of
special tirfor wire rope fitted with a safety hook and
®
wound onto a metal reeler. Longer or shorter lengths
of wire rope are available on request.
This manual together with a guarantee card are supplied
with each machine, as well as the CE declaration
of conformity.
IMPORTANT : tirfor
designed to meet the particular requirements of the
tirfor machine.
®
The manufacturer does not guarantee the safe
operation of machines used with wire rope other
than tirfor wire rope.
®

2. ASSEMBLY DRAWINGS

Various ways of rigging are shown in Figs. 2.1, 2.2, 2.3
and 2.4. Figs. 4 and 5 show specific arrangements (one
forbidden and the other recommended).
The machine may be anchored to a fixed point with the
wire rope travelling towards the machine (Figs. 2.1, 2.2,
2.3), or travel along the wire rope, with the load, the wire
rope itself anchored to a fixed point (Fig. 2.4).
16 T516 D TU 32
™ ™
1.6
13.5 27
2.3 2.4
13.1 26.6
28.9 56
523 676
650 860
315 330
127 156
650/1150 680/1190
11.5
8000 16000
0.5
42/57 30/48
E470H E480H
wire rope has been specially
®
T532 D
™
3.2
24
2.3
26.6
52.9
620
840
355
130
650/1150
16.3
1
18/36