Change The Doppler Settings - arjo HUNTLEIGH SR Série Mode D'emploi

EN
5.3

Change the Doppler Settings

5.3.1 Setup Screen
Note: A probe must be connected before the Setup Screen can be accessed.
Press to turn the unit ON, then press and hold button 3 to enter Setup mode.
Press Button 1
5.3.2 Set the Screen Brightness
5.3.3 Set the Date and Time
to move the selection, Button 2
Brightness
Battery type
Selection
FHR Averaging
Mode
Audio Recording
to accept, or Button 3
Press
discard the changes.
Date and Time
Setup
Lock screen
Trace Options
Timer
to go back.
to accept or to