Frozen Trace - arjo HUNTLEIGH SR Série Mode D'emploi

EN
6.3.1 Obstetric FHR Trace Mode Screen*
Trace display mode is for indication only and is not a replacement for conventional fetal monitoring. If
any concern arises from viewing this trace, alternative means (e.g. full CTG) must be used to determine
fetal condition.
This screen displays the FHR as a trace on a graph. The horizontal and vertical scales are determined in
setup**. The trace displays from left to right until it fi lls the screen then scrolls to the left as each new data point
is added.
** Trace scaling is equivalent to 1 or 3 cm/min and 20 or 30 beats per cm, scaled down to screen size,
maintaining the same aspect ratio to avoid distortion of the trace for easy visual interpretation.
*Note: These options are only available if the FHR Trace Mode screen has been enabled.
6.3.2 Trace Scroll section
6.4

Frozen Trace

Press at any time to return to the live trace screen.
To Save a trace:
To open a saved trace:
FHR Trace Mode Icons
Numeric Display Mode
Register fetal movement and place marker
Stop Trace and display Frozen Trace option
Press when the desired information is displayed.