Change The Doppler Settings; Setup Screen; Set The Date And Time - arjo HUNTLEIGH DMX Mode D'emploi

EN
5.3

Change the Doppler Settings

5.3.1

Setup Screen

Note: A probe must be connected before the Setup Screen can be accessed.
Press to turn the unit ON, then press and hold button 3 to enter Setup mode.
Press Button 1
5.3.2 Set the Screen Brightness
5.3.3

Set the Date and Time

Setup Screen Icons
to move the selection, Button 2
Brightness
Battery type
Selection
to accept, Button 3
Press
discard the changes.
Date and Time
Setup
Lock screen
to exit menu.
to accept or to