Troubleshooting - Unimac UDE807F Directives D'installation Et De Fonctionnement

Try these troubleshooting tips before making a service call. They
may save you time and money.
Dryer Symptom
Dryer won't start
Dryer won't heat
Dryer doesn't dry clothes satisfactorily
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT

Troubleshooting

Possible Cause/Solution
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
48
Nonmetered models - Turn timer knob further into cycle.
Metered models - Insert coin(s) or card.
Metered models - Activate timer. Push coin slide all the way
in.
For dryers equipped with a power cord, make sure the power
cord is plugged all the way into the electrical outlet.
Make sure loading door is closed.
Press PUSH-TO-START button or START pad.
Make sure the laundry room fuse(s) isn't blown or loose, or
circuit breakers aren't open.
The dryer itself does not have an electrical fuse. An electric
dryer has an electrical circuit with two fuses.
Check if motor overload protector has cycled. Wait 10 mi-
nutes and try again.
Nonmetered models - Turn timer knob further into cycle.
Metered models - Activate timer. Push coin slide all the way
in.
Make sure the laundry room fuse(s) isn't blown or loose, or
circuit breakers aren't open.
The dryer itself does not have an electrical fuse. An electric
dryer has an electrical circuit with two fuses.
Make sure controls are in a HEAT setting.
Gas dryer only – Make sure equipment and main gas line
valve is turned on.
Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
Check weather hood to make sure flapper moves freely, has
not been pushed in or has not been blocked.
Check exhaust duct to outside to see if it is kinked, blocked or
needs cleaning.
Check weather hood to make sure flapper moves freely, has
not been pushed in or has not been blocked.
Clean the lint filter.
Make sure the load isn't too small. Small loads may not tum-
ble properly or dry evenly.
Check load being dried. Heavy items dried with lightweight
items will not dry as quickly as the rest of the load.
Troubleshooting
Table continues...
Part No. D512681ENR9