Start Dryer; Indicator Lights; Operation Instructions For Netmaster Dryers; Clean Lint Filter - Unimac UDE807F Directives D'installation Et De Fonctionnement

1. Insert card into opening.
NOTE: If Additional Time Feature is turned on, addi-
tional dryer time may be purchased at cycle start or
while dryer is running.
2. Remove knits when slightly damp because overdrying may
cause shrinkage. Do not tumble dry knit woolens.

Start Dryer

1. To start dryer, push START pad.
2. To stop dryer at any time, open the door.
3. To restart the dryer, close door and push START pad. Cycle is
completed when time remaining reaches 00 minutes.
Figure 52
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
DRY1927N_SVG
Figure 51
DRY1928N_SVG

Indicator Lights

START
DRYING
COOL DOWN
Operation Instructions for NetMaster
Dryers
To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUC-
TIONS before operating this appliance.
IMPORTANT: Before using dryer for the first time, use
an all-purpose cleaner, or a detergent and water solu-
tion, and a damp cloth to remove shipping dust from
inside of dryer drum.
IMPORTANT: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.

Clean Lint Filter

Clean lint filter before each use.
43
START is lit whenever the
dryer is not in a cycle, the full
vend price has been satisfied
and the dryer door is closed.
When the START pad is press-
ed, the cycle will begin or re-
sume.
DRYING is lit to indicate that
one of the heated cycles
(HIGH TEMP, MED TEMP,
LOW TEMP or DELICATES)
is currently in operation. DRY-
ING will turn off at the end of
a heated cycle or when the
COOL DOWN cycle begins.
COOL DOWN is lit whenever
the COOL DOWN portion of a
heated cycle is active. It is also
lit when NO HEAT is pro-
grammed for a cycle in opera-
tion.
WARNING
Part No. D512681ENR9
Operation
W727