Reverse Door, If Desired - Unimac UDE807F Directives D'installation Et De Fonctionnement

Installation
L.P. Altitude Adjustments
Altitude Orifice Size
m [feet] No.
1070 [3500] 54
2290 [7500] 55
3355 [11000] 56

Reverse Door, if Desired

The door on this dryer is completely reversible. To reverse door
proceed as follows:
1. Remove four hinge attaching screws.
2. Remove all nine screws.
3. Pull bottom of door liner out, then pull down, removing door
liner from door panel.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
mm [in-
ches] Part No.
1.40 [0.0550] D503785
1.32 [0.0520] 58755
1.18 [0.0465] D503786
Table 5
D675I_SVG
Figure 10
D272P_SVG
Figure 11
B
A
4. Rotate door panel 180 degrees as shown.
5. Remove door strike from door liner and reinstall on opposite
side.
6. Insert liner under flange on bottom of door, then push top of
door liner into place.
B
A
7. Reinstall nine screws removed in Step 2.
22
DRY1916N_SVG
Figure 12
D273P_SVG
Figure 13
DRY1917N_SVG
Figure 14
DRY1918N_SVG
Figure 15
Part No. D512681ENR9