Start Dryer; Indicator Lights - Unimac UDE807F Directives D'installation Et De Fonctionnement

2. Follow directions on display. Do not remove the card until the
REMOVE CARD LED is lit.
M343I_SVG
NOTE: If Additional Time Feature is turned on, addi-
tional dryer time may be purchased at cycle start or
while dryer is running.
3. Remove knits when slightly damp because overdrying may
cause shrinkage. Do not tumble dry knit woolens.

Start Dryer

1. To start dryer, push START pad.
2. To stop dryer at any time, open the door.
3. To restart the dryer, close door and push START pad. Cycle is
completed when time remaining reaches 00 minutes.
Figure 58

Indicator Lights

INSERT COINS/CARD
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
D778I_SVG
INSERT COINS/CARD is lit
to prompt the user to insert
coins or a card to satisfy the
vend price. When INSERT
COINS/CARD is lit,the three
digits will display the vend
price remaining to be satisfied.
Table continues...
START
DRYING
COOL DOWN
ADD TIME (Card Models On-
ly)
REMOVE CARD (Card Mod-
els Only)
45
Operation
START is lit whenever the
dryer is not in a cycle, the full
vend price has been satisfied
and the dryer door is closed.
When the START pad is press-
ed, the cycle will begin or re-
sume.
DRYING is lit to indicate that
one of the heated cycles
(HIGH TEMP, MED TEMP,
LOW TEMP or DELICATES)
is currently in operation. DRY-
ING will turn off at the end of
a heated cycle or when the
COOL DOWN cycle begins.
COOL DOWN is lit whenever
the COOL DOWN portion of a
heated cycle is active. It is also
lit when the NO HEAT cycle is
in operation.
ADD TIME flashes when a
card is inserted while a cycle is
running or when a card is left
in the reader for at least five
seconds after cycle has started.
REMOVE CARD flashes
when a card is inserted or left
in the reader after a transaction
is complete. It will also flash
alternately with ADD TIME
when a card is inserted while a
cycle is running or when a
card is left in the reader.
Part No. D512681ENR9