Unimac UDE807F Directives D'installation Et De Fonctionnement page 13

The dryer must not be installed or stored in an area where it will
be exposed to water and/or weather.
The dryer needs sufficient clearance and an adequate air supply
for proper operation and ventilation, and for easier installation
and servicing. (Minimum clearances are shown in Figure 4 ).
4. Place the dryer in position, and adjust the legs until the dryer
is level from side to side and front to back. Leveling legs can
be adjusted from inside the dryer with a 1/4 in. driver.
5. All four legs must rest firmly on the floor so the weight of the
dryer is evenly distributed. The dryer must not rock.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
1
1. Dryer Base
2. Level
3. Leveling Leg
4. Rubber Foot
13
2
3
4
D678I_SVG
Figure 3
Part No. D512681ENR9
Installation