Start Dryer; Operation Instructions For Mdc Dryers; Clean Lint Filter - Unimac UDE807F Directives D'installation Et De Fonctionnement

PERM PRESS
CASUAL
NORMAL
FABRIC SELECTOR
Figure 43

Start Dryer

Nonmetered Models
1. Rotate timer knob to desired time setting (up to 60 minutes).
2. Press the PUSH-TO-START button. IN USE light will come
on (indicating start of cycle).
Figure 44
Coin Slide Models
1. Place coin(s) in slide and carefully push in as far as possible
and then pull slide out as far as possible.
2. After IN USE light comes on (indicating start of cycle), press
the PUSH-TO-START button.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
DELICATE
NO HEAT
DRY2185N_SVG
DRY2101N_SVG
3. Remove knits when slightly damp because overdrying may
cause shrinkage. Do not tumble dry knit woolens.
NOTE: This machine includes an extended tumble fea-
ture. Starting 20 minutes after a cycle ends, the cylin-
der will tumble for two minutes every hour without
heat, up to 18 hours or until door is opened.

Operation Instructions for MDC Dryers

To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUC-
TIONS before operating this appliance.
IMPORTANT: Before using dryer for the first time, use
an all-purpose cleaner, or a detergent and water solu-
tion, and a damp cloth to remove shipping dust from
inside of dryer drum.
IMPORTANT: Remove all sharp objects from laundry to
avoid tears and rips to items during normal machine
operation.

Clean Lint Filter

Clean lint filter before each use.
41
W297I_SVG
Figure 45
WARNING
Part No. D512681ENR9
Operation
W727