Switch Between 12H/24H Format - Eurochron EFWS 310i Notice D'emploi

• Briefly press the MODE button, the hours flash.
Use the ▲ or ▼ buttons to set the hours (press and hold for quick adjustment).
• Briefly press the MODE button, the minutes flash.
Use the ▲ or ▼ buttons to set the minutes (press and hold for quick adjustment).
• Briefly press the MODE button.
This automatically resets the seconds to "00" and exits setting mode.
The previously time set appears.
When you enter setting mode, DCF reception is deactivated. If DCF reception is to be
activated again, proceed as described in chapter 10. b).
Important: The settings for weekday display language and 12h/24h mode remain
active.
b) Switch between 12h/24h format
• Briefly press the ▲ or ▼ buttons (3 or 5) repeatedly until the
• Press and hold the MODE button (2) until the language for the weekday display flashes on
the lower right of the display.
• Briefly press the MODE button repeatedly until "12 Hr" or "24 Hr" flashes on the display.
• You can switch between the 12 hour and 24 hour format using the ▲ or ▼ buttons.
In 12h format, "AM" appears to the left of the time in the first half of the day and "PM"
during the second half of the day.
• Briefly press the MODE button repeatedly until all display segments cease flashing.
After exiting setting mode, DCF reception is deactivated.
To re-activate DCF reception, proceed as described in chapter 10. b).
icon flashes.
49