Operating The Appliance; Function Switch; Temperature Control; Timer - SilverCrest SGBR 1500 D4 Mode D'emploi

Operating the appliance

Function switch

You can switch on the appliance with the function
switch 3, and also set 5 different functions:
Symbol
"Upper & lower heat/hot air"

Temperature control

Use the temperature control 2 to set the desired
temperature.
SGBR 1500 D4
Meaning
"Upper heat"
e.g. to gratinate
"Lower heat"
e.g. for baking
"Upper & lower heat"
e.g. for baking a pizza
"Upper heat/hot air/
rotisserie"
e.g. to roast poultry
e.g. to reheat rolls
"OFF" the appliance is
switched off.

Timer

Use the timer 4 to switch the device on / set the
cooking time.
Set the timer 4 to the desired cooking time.
■
After expiry of the set time a signal tone sounds
and the appliance stops heating.
If the function "Upper heat/hot air/rotisserie"
is selected, the rotisserie z will also stop
turning.
■ If you wish to use the device without a time limit,
turn the dial on the timer 4 counter-clockwise to
the position "ON".

Grilling and baking

1) Put the crumb tray 7 into the appliance.
2) Remove the rack e and baking tray q from
the appliance. If required, cover these with bak-
ing paper or lightly grease the baking tray q
with suitable baking fat.
NOTE
► Depending on the meal, the oven must be
preheated. Refer to the guidelines in the
respective recipe. Preheating is useful for:
–
very short baking times,
–
crisp crusts,
–
sensitive meals that require a constant
temperature, such as soufflés.
► If no preheating is required, skip step 3).
3) Allow the appliance to heat up for approx.
10 minutes (depending on the temperature
setting) to the required temperature:
–
Select the required temperature using the
temperature control 2.
–
Select the required function with the function
switch 3.
GB │ IE │
9 ■