Troubleshooting - SilverCrest SGBR 1500 D4 Mode D'emploi

Troubleshooting

Fault
The appliance is not
working.
The control lamp 5
comes on and but the
appliance does not
heat up.
The cooking time of
the food seems very
long
Smoke and smells
develop during use.
If the malfunction cannot be corrected with the above suggestions, or if you have found some other kind of
malfunction, please contact our Customer Service.
SGBR 1500 D4
Cause
The mains plug is not connected to the
mains power.
The mains power socket is defective.
The appliance is defective.
The function switch 3 is set to OFF.
The glass door 6 has been opened often
to check the cooking progress.
The wrong temperature level has been set.
There is detergent or food residue on the
heating elements.
Solution
Insert the plug into a mains power
socket.
Use a different mains power
socket.
Contact Customer Services.
Turn the function switch 3 to the
desired function.
Do not open the glass door 6
any more often than is absolutely
necessary.
Check the temperature settings.
Remove the food from the ap-
pliance and continue cooking
process with the glass door 6
open until the smoke stops.
GB │ IE │
13 ■