Using The Baking Tray/Rack; Before First Use - SilverCrest SGBR 1500 D4 Mode D'emploi

Using the baking tray/rack

WARNING! RISK OF INJURY!
Always use the tongs 0 to insert the hot
►
baking tray q/the hot rack e into the appli-
ance or to remove it.
Push the baking tray q/the rack e into one of
■
the 3 rails in the cooking chamber of the appliance.
ATTENTION! DAMAGE TO PROPERTY!
Never place the baking tray q/the rack e
►
directly onto the heating elements 8.
To remove the hot baking tray q or the rack e,
■
hook the tongs 0 onto them as follows:
Fig. 4: Hooking the tongs 0 onto the rack e
Fig. 5: Hooking the tongs 0 onto the baking
tray q
■ 8 │ GB │ IE
Before first use
1) Insert the plug into a mains power socket.
2) Turn the temperature control 2 clockwise to
the maximum temperature (to the stop).
3) Turn the function switch 3 to "upper and
lower heat" .
4) Open the glass door 6 leave this open for this
operation.
5) Remove any installed accessories from the
cooking chamber.
6) Turn the timer 4 to 20 minutes.
NOTE
► The first time the appliance heats up, a
small amount of smoke and odour may be
generated due to production-related residue.
This is normal and is completely harmless.
Provide sufficient ventilation by opening a
window, for example.
The appliance switches off automatically
after 20 minutes.
If you want to interrupt the heating process
prematurely, turn the temperature control 2
counter-clockwise to the stop and set the
timer 4 to "OFF".
7) Allow the appliance to cool down, then clean
the appliance as described in the chapter
"Cleaning and care".
The appliance is now ready for use.
SGBR 1500 D4