Setting The Time And Date; Programme Memory; Alarms - Gram KPS 120 Mode D'emploi

Setting the time and date

To set the time and date of the controller:
Select Menu 06, and push
The flashing digit can be changed by using the keys
MENU
Press to return to the main menu.

Programme memory

Select Menu 07, and push
whether it is already saved or not:
Program 01
Pos time 90´
Use the up/down keys
key. To exit the programme without saving, push

Alarms

This is a menu for displaying memorized alarms. The controller is able to save up to 30 alarms with the relating
data.
Select Menu 08, and push
If no alarms are saved, the display shows:
The alarms are displayed in order from A01 to A30. Furthermore, the alarm starting time and date are
displayed:
A05 Err room
S 14:21 10/06/05
To display further alarm informations, push
activation, or if the alarm is still present:
A05 Err room
Present
To scroll the alarm menu, use the up/down keys
Push to return to the main menu.
765042145
to enter the menu. The display shows:
to enter the menu. The display shows the programme number, and indicates
to scroll the programmes from 01 to 20. To save a programme, press the
MENU
to enter the menu.
: max or min temperature, duration, call service, time of de-
rev.000
Date:
Hour:
. Push to save and enter the next digit.
Program 20
-------
.
No date
.
10/06/05
14:22:46
31