Gram KPS 120 Mode D'emploi page 29

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 81
Displaying the latest defrosting cycles:
Select Set Up 01. Then push
starting time and date, duration in minutes, and the defrost numbers in order from D01 to D32.
D09
22Min
S 11:44 10/06/05
The M indicates the type of defrost start:
M=01
Defrost started manually during storage.
M=02
Periodic defrost during storage.
M=03
Defrost started on the blast chilling starting.
Scrolling through the defrost cycles can be done by using the up/down keys
If there are no recorded data, the display shows: No Date.
MENU
Push
to return to the main menu.
Displaying door openings:
Select Set Up 02. Push
Date
Number of door openings
exceeding the time setting
for door alarm.
Use the up/down keys
MENU
Push
to return to the main menu.
Changing parameters:
Select Set Up 03. Then push
Parameter name
and value
Description
Use the up/down keys
To change a parameter, push
Push
again to confirm the new value. Push
765042145
to see the recent 32 defrost cycles and the relating data. The display shows
M=03
to display the recent door openings.The controller allows recording up to 31 days.
05/11
long:01
to select the other dates of door opening.
to enter setting of the parameters.
A03 = -10°C
Low alarm
to scroll the various parameters.
, and then use the up/down keys
Total time – door openings
01h34 min
tot: 03
MENU
to return to the menu.
rev.000
.
Total number of door
openings
to change the value.
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kps 180

Table des Matières