Printing Data; Inputs/Outputs; Fan Speed - Gram KPS 120 Mode D'emploi

Printing data

Note: extra equipment is needed for this function.
Select Menu 09, and push
Push to print the data.
Push to exit the menu without printing.

Inputs/outputs

This menu displays the inputs/outputs state, e.g. the current sensor temperature values and state of the relays.
Select Menu 10, and push
To scroll the various data, use
Room -6°C
Needle 15°C
Evapor. -10°C
Conden. 21°C
C D FE FC L R A
1 0 0 1 1 0 0
DI1 DI2 FAN
0 1 80

Fan speed

The evaporator fans are normally set at max. speed (100%). However it is possible to reduce the speed to
50%. By pushing during the process, the current fan speed is displayed. The speed can be changed by
pushing .
Speed
100%
Push to exit the programme.
765042145
to enter the menu. The display shows:
to enter the menu.
:
Cabinet and probe temperature.
Evaporator and condenser temperature.
Outputs:
1= relay activated
0= relay de-activated
Digital inputs and evaporator fan speed.
Speed
50%
rev.000
print data?
No Ok
32