Specification; Design And Measuring Principle - Burkert 8206 Manuel D'utilisation

2 SPECIFICATION

2.1 Ordering table, 8206 compact versions
8206, compact, 4-20 mA output, 12-30 VDC
Relays Gasket Electrode
No FPM 1) Unitrode ORP EN 175301-803 plug
1)
No FPM Unitrode ORP 2 cable glands
1)
Yes FPM Unitrode ORP 2 cable glands
1) 1 set including 1 cable gland obturator, 1 multiway seal, 1 mounting instruction sheet and 1 black EPDM-gasket is
included in he standard delivery.
2.2 Ordering table, 8206 remote versions
8206, panel-mounted versions
Output
4-20 mA
4-20 mA, 2 relays
8206, wall-mounted versions
Output
4-20 mA
4-20 mA, 2 relays
4-20 mA
4-20 mA, 2 relays
The redox sensor holder 8200 for a remote redox transmitter 8206 must be ordered separa-
tely: see corresponding datasheet or instruction manual (order code 428937).

2.3 Design and Measuring Principle

Design
Redox transmitter 8206 compact
The redox-transmitter compactly combines a redox-sensor and a transmitter 8206 with
display.
The sensor component consists of a replaceable combination redox-electrode, screwed into
the sensor housing with screw-in threads.
The measured signal is connected to the remote transmitter via a coax cable.
The transmitter component converts the measured signal, displays the instantaneous value
and computes the output signals.
The access to the output terminals is provided via an EN 175301-803 plug or two cable
glands.
REDOX TRANSMITTER 8206
Electrical connection
Power supply
12-30 VDC
12-30 VDC
Power supply
12-30 VDC
12-30 VDC
115/230 VAC
115/230 VAC
E-3-
Order code
418836
418850
418837
Order code
429088
430754
Order code
430755
430756
430757
430758