Operation; Transmitter Operating And Control Elements - Burkert 8206 Manuel D'utilisation

4 OPERATION

The operation of the redox transmitter is classified according to 3 levels.
Main Menu
Redox and output current are displayed in the normal function mode.
The "HOLD" function and electrode calibration ("ORP CAL.") can be accessed . (§ 4.2)
Calibration Menu
The calibration mode allows adjustments of all redox measurement parameters:
language, 4...20 mA output, relay thresholds (option), and filter selection (§ 4.3).
Test Menu
The test menu allows the basic setting of the transmitter: Offset (4 mA), Span (20 mA).
A redox value can be simulated via this menu, allowing the process to be tested in the "dry
condition" (§ 4.4)

4.1 Transmitter Operating and Control Elements

To scroll-up the menus or
increase a value
To scroll-down the
menus or select a digit to
be modified
REDOX TRANSMITTER 8206
Relay 1 status
E-23-
Validate chosen
parameter or menu
Relay 2 status