Introduction; Unpacking And Control; About This Manual; User's Responsibility For Safety - Burkert 8206 Manuel D'utilisation

1 INTRODUCTION

Dear Customer,
BEFORE INSTALLING OR USING THIS
PRODUCT, PLEASE TAKE OUR ADVICE
AND READ THE ENTIRE MANUAL THO-
ROUGHLY.
This will enable you to fully profit from all of
the advantages offered by this product.

1.1 Unpacking and Control

Please verify that the product is complete
and free from any damage.
Compare the specifications on the label to
the following list to ensure that you have re-
ceived the proper unit. If there is any loss or
damage, please contact your local Bürkert
subsidiary.

1.2 About this Manual

This manual does not contain any warranty
statement. Please refer to our general terms
of sale and delivery.
Only properly-trained staff should install
and/or repair this product. If difficulties
should occur at the time of installation,
please contact your nearest Bürkert sales
office for assistance.
REDOX TRANSMITTER 8206

1.3 User's Responsibility for Safety

Bürkert manufactures a broad range of
redox potential transmitters (compact, wall-
mounted or panel-mounted versions). While
each of these products is designed to ope-
rate in a wide variety of applications, it is the
user's responsibility to select a transmitter
model that is appropriate for the application,
install it properly, and maintain all compo-
nents. Special Attention must be paid to
the chemical resistance of the transmitter
against the fluids which are directly contac-
ting the product.
This symbol appears in the
manual to draw special atten-
tion to instructions that affect
the safe installation, function
and use of the product.

1.4 Electromagnetic compatibility

This transmitter conforms to the EMC-Di-
rective of the Council of European Commu-
nities 89/336/EEC. In order to comply with
this directive, follow the wiring instructions.
E-2-