Changing The Oven Bulb; Protective Glass Panels; After-Sales Service; E Number And Fd Number - Junker JB23PP50 Mode D'emploi

Changing the oven bulb

If the oven light bulb is damaged it must be replaced. Special
25 W, E14, 220 V-240 V heat-resistant light bulbs (to 300 ºC
temperature) can be obtained from the Technical Support
Service or in specialist shops. Only use this type of bulb.
ã=
Risk of electrical discharge and the resulting shock.!
Disconnect the appliance from the mains. Ensure that this is
turned off.
Place a dishcloth into the cold oven to avoid damage.
1.
2. Remove the glass protection by unscrewing it to the left.

After-sales service

Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate containing these numbers
can be found on the right-hand side of the oven door. You can
make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.

Energy-saving and environmental protection tips

In this chapter we offer you some advice about how to save
energy when baking or roasting and how to properly dispose of
the appliance.

Saving energy

Preheat the oven only if this is required by a recipe or is
■
indicated in the tables.
Use dark, lacquered or black enamel baking tins. These are
■
more efficient at absorbing heat.
Keep the oven door closed during cooking, baking and
■
roasting cycles.
When baking several cakes, these should be preferably
■
baked one after the other. The oven will still be hot, thereby
reducing the cooking time for the second cake. Two
rectangular baking tins can be placed side-by-side.
For long cooking times, the oven may be turned off
■
10 minutes prior to the specified time, allowing the item to
continue to cook but taking advantage of the oven's residual
heat.
32
Replace the bulb with a similar bulb.
3.
4. Screw the protection glass back into place.
Remove the dishcloth and switch the oven back on at the
5.
mains.

Protective glass panels

Damaged protective glass panels must be replaced. Protective
glass panels cay be obtained from the Technical Assistance
Service. Please quote your appliance's product number and
production number.
E no.
O
After-sales service
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
After-sales contact details for all countries can be found in the
attached after-sales service directory.

Environmentally-friendly disposal of waste

Dispose of packaging with the environment in mind.
This appliance is identified according to the Waste
Electrical and Electronic Equipment Directive WEEE
2002/96/EC. This directive defines the framework for
the recycling and reuse of appliances used in EU
territory.
FD no.