Your New Oven; Control Panel; Function Control Knob; Sensors And Display Panel - Junker JB23PP50 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Your new oven

We will now describe your new oven. This chapter explains the
functions of the control panel and its individual elements.
Information is also provided about the oven's accessories and
internal components.

Control panel

Below is a general overview of the control panel. The display
panel cannot show all the symbols at the same time. Elements
may vary according to the model.
Knobs
The control knob is retractable on some ovens. The control
knob is retracted or returned by pressing it when at the zero
setting.
Sensors
Do not press the sensors forcefully. Only press the relevant
symbol.

Function control knob

The function control knob is used to select the type of heating.
Setting
Û
Zero setting
J
Rapid heating
Hot air*
%
Top and bottom heat-
ing*
Grill with hot air
š
Large surface grill
* Type of heating used to determine the appliance energy effi-
ciency rating according to EN60350.
6HQVRUV
Use
The oven is off.
The oven reaches the pro-
grammed temperature very
quickly.
For cakes and pastries. These can
be baked on two levels. A fan
located on the rear wall of the
oven disperses the heat evenly.
For cakes, gratin dishes, and lean
meat roasts, e.g. veal or game, on
one level. The heat is provided by
the bottom and top heating ele-
ments.
For roasting joints of meat, poultry
and fish. The grill heating element
and the fan switch on and off alter-
nately. The fan circulates the heat
generated by the grill around the
food.
For grilling steaks, sausages, fish
and toasting bread. The entire sur-
face below the grill heating ele-
ment is heated.
'LVSOD\ SDQHO
6HQVRUV
)XQFWLRQ FRQWURO NQRE
Setting
$
Bottom heating
V
Self-cleaning
\
Light
* Type of heating used to determine the appliance energy effi-
ciency rating according to EN60350.
When a heating type is selected, the
on the display panel.

Sensors and display panel

The sensors are used to set different functions. The set values
are shown on the display panel.
Sensor
p
Temperature
0
Time functions
A
Minus
@
Plus
The symbol for the time function activated lights up on the
display panel.
Use
Confits, baking and cooking au
gratin. The heat comes from the
bottom heating element.
Using the self-cleaning function to
clean the inside of the oven. The
oven heats to clean itself.
For turning on the oven light.
AA
symbol is displayed
Sensor function
Select the temperature and grill
power or cleaning level.
V
Select the timer
, the cooking
x
y
time
, the end time
and the
0
actual time
.
Reduces programmed values.
Increases programmed values.
23

Publicité

Table des Matières
loading

Table des Matières