Cooking Time; End Time - Junker JB23PP50 Mode D'emploi

Cooking time

The oven allows you to set the cooking time for each type of
food. The oven switches off automatically when the cooking
time has elapsed. This avoids interrupting other tasks to switch
the oven off or exceeding the cooking time by mistake.
Example in the picture: Cooking time: 45 minutes.
1. Select the type of heating using the function control knob.
0
Press the sensor twice.
2.
The display panel will show
x
symbol .
Programme the cooking time using the
3.
Sensor suggested value
Sensor suggested value
p
Press the sensor.
4.
Set the temperature or required grill power using the
sensors.
The oven will switch on after a few seconds. The programmed
temperature will be shown on the display panel and the
x
symbol will light up.
The cooking time has finished
A signal will sound. The oven will stop heating. The display ‹‹ ‹‹
panel will show : . Press the
cooking time can be set with the sensors 0
the sensor and turning the control knob to zero. The oven is
off.
Changing the cooking time
0
@ Press the A sensor twice. Change the cooking time using the
or sensors.
Cancelling the cooking time
0
Press the sensor twice. Reset the cooking time to A
with the sensor . The time has been cancelled.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel.
V
To view the timer 0 , the cooking time 0
the time , press the sensor repeatedly until the required
symbol lights up. The corresponding value will be shown for a
few seconds on the display panel.
26
‹‹ ‹‹
: and the cooking time
@ A
or sensors.
@
= 30 minutes.
A
= 10 minutes.
0
sensor twice . A new @ A
or . Or pressing
x
, the end time

End time

The oven allows you to set the time when you want the food
ready. In this case the oven switches on automatically and
switches off at the set time. For example, the food may be
placed in the oven in the morning and the oven set so that it is
ready at midday.
Ensure that the food will not go off if it is in the oven for too
long.
Example in the picture: It is now 10:30 AM, the cooking time is
45 minutes and the oven should switch off at 12:30 PM.
Set the function control knob.
1.
Press the
2.
Programme the cooking time using the
3.
4. Press the
The time when the dish will be ready and the end time
y
symbol
5. Delay the end time using the
@ A
or
Press the
6.
Set the temperature or required grill power using the
sensors.
The programmed temperature and the
on the display panel, and the oven will be set to standby. When
the oven turns on, the programmed temperature and the
x
symbol will be shown. The
The cooking time has finished
A signal will sound. The oven will stop heating. The display
panel will show
cooking time can be set with the sensors
0
the sensor and turning the control knob to zero. The oven is
off.
‹‹ ‹‹
:
Changing the end time
Press the sensor
@ A
the or sensors. The altered time is shown after a few
seconds. Do not change the end time if the cooking time has
already started to count down. The final result may not be the
same.
y
or
Cancelling the end time
0
Press the
current time with the
0
sensor twice.
0
sensor.
will be shown on the display panel.
@ A
or
p
sensor.
y
symbol turns off.
‹‹ ‹‹ 0
: . Press the sensor twice . A new
0
three times. Change the end time using
sensor three times and reset the end time to the
A
sensor. The oven switches on.
@ A
or sensors.
sensors.
@ A
or
y
symbol will be shown
@ A
or . Or pressing